MAX5
AA5083 is an aluminium alloy used for mold products, which provides strength, good anodizing response, weldability, and better machinability over other aluminium mold products.
BENEFITS
Excellent Dimensional Stability
![fichier-4 fichier-4](/wp-content/uploads/2018/06/fichier-4-1.png)
WELDABILITY
WIG/MIG
VERY GOOD
WIG/MIG
VERY GOOD
![fichier-5 fichier-5](/wp-content/uploads/2018/06/fichier-5-1.png)
INLAND ATMOSPHERIC
CORROSION RESISTANCE
EXCELLENT
CORROSION RESISTANCE
EXCELLENT
![fichier-5 fichier-5](/wp-content/uploads/2018/06/fichier-5-1.png)
Hard Anodizing
EXCELLENT
EXCELLENT
![fichier-5 fichier-5](/wp-content/uploads/2018/06/fichier-5-1.png)
MACHINEABILITY
EXCELLENT
EXCELLENT
![fichier-4 fichier-4](/wp-content/uploads/2018/06/fichier-4-1.png)
WELDABILITY
By Resistance
VERY GOOD
By Resistance
VERY GOOD
![fichier-3 fichier-3](/wp-content/uploads/2018/06/fichier-3-1.png)
MARINE ATMOSPHERIC
CORROSION RESISTANCE
GOOD
CORROSION RESISTANCE
GOOD
![fichier-1 fichier-1](/wp-content/uploads/2018/06/fichier-1-1.png)
Anodizing
DECORATIVE
Not suitable
DECORATIVE
Not suitable
![fichier-4 fichier-4](/wp-content/uploads/2018/06/fichier-4-1.png)
POLISHING
ABILITY
VERY GOOD
ABILITY
VERY GOOD
TYPICAL APPLICATIONS FOR MAX5 CAST ALUMINIUM MOLD BLOCKS
- Robotic Components
- Rubber & Plastic Molds
- Vacuum Chambers
- Equipment & Prototype
- Tool & Jig
- Templates
PRODUCT CHART
Availability from 4” to 42.5” thick
other sizes may be available upon request
other sizes may be available upon request
Thickness (Max.) | Width (Max.) | Length (Max.) |
---|---|---|
22.25″ | 98″ | 293″ |
23.25″ | 102″ | 175″ |
25.25″ | 72.5″ | 289″ |
29.25″ | 62″ | 289″ |
42.5″ | 67.75″ | 111″ |
MECHANICAL STRENGTHS
(TYPICAL VALUES)
(TYPICAL VALUES)
Ultimate Tensile
Yield Strength
Elongation
Brinell Hardness